Allwin Machine & Equipment Co.,Ltd
Allwin Machine & Equipment Co.,Ltd
Add to Cart
30L Silicon Carbide Chamber Wet Grinding Horizontal Bead Mill Machine 30kW For Ceramic Powder
The main feactures of Bead Mill Machine:
1. Different materials for meeting different needs :
abrasive-resisting materials,:silicon carbide ceramics, SUS 304 stainless steel, resistant stainless steel,PU, zirconia ceramics,etc
2. Decrease the temperature:
Applied self-owned double spiral cooling technology to enhance the space of heat rejection, with superior material with good thermal conductivity and lower the temperature before coollant come in pipe
3. Strengthen the fineness:
the smallest grinding media of 0.1mm with 200-300nm.
4. Enhance the efficiency:
higher 10-30% than traditional machines
5. Reduce the workforce with indicator light
One worker could easily operate and manage 5-10 sets mill machines if mills add the indicator light
Main Technical Parameter
| NO. | Main parameter | HZ PLUS30 | Note |
| 1 | Main motor power(kW) | 30 | 3phase,230V 50Hz |
| 2 | Effective Volume(L) | 30 | |
| 3 | Water presure Mpa | 0.3 | |
| 4 |
Cooling water consumption (L/min) |
2.5 -3m3/h | The lower limit can be selected for the water consumption, in case that the cooling water temperature is lower than 10℃. |
| 5 | Overall dimension (mm) | 1940*1000*1840 | |
| 6 | Weight (kg) | 1500 |
Configuration instructions
1. Outer Chamber: 304 stainless steel
2. Inner Chamber: 304stainless steel/ silicon carbide ceramincs/ resistant steel/ pu
3. Dispersing shaft: 40Cr with hard chromium plating
4. Dispersing disk: 304 Stainless steel / zirconia ceramics/ PU
5. Mechanical seal: double mechanical seal
6. Feeding and discharging end covers on the chamber: 304 stainless steel /zirconia ceramics
7. Turbine centrifugal separator and pigs: 304 stainless steel /zirconia ceramics/ PU and YG6 pines.
8. Dynamic discharge screen ring: 304 stainless steel screen ring with 304
9. Feeding pump: 1" ARO pneumatic diaphragm pump.
10. Electric Appliance configuration: (Non) Explosion-proof machine, (non) explosion-proof motor 30kW.(Non) Explosion-proof parts: operation column,electrical appliance boxes;electric contact pressure gauge, temperature,solenoid valves ,etc.
Factory disply
Packing and shipping:
Be covered with anti-abrasion film and then packed in wooden boxes, then seashipping by FCLor LCL.
Related products: Dispersing machine & the Zirconical beads, This 2 products are much important for the Bead mills, this materials is pre-dispersing well, It's better for grinding with bead mill after pre-dispesing well. Also the zirconia beads (grinding beads with different size for meeting different finally fineness.
If need more detailed information, please don't hesitate contact us, Also Warmly welcome to visit us.