Allwin Machine & Equipment Co.,Ltd
Allwin Machine & Equipment Co.,Ltd
Add to Cart
High Quality Water Base Paint Coating 30 L Horizontal Sand Grinding Mill Low Temperature
The main introduction of Sand Grinding Mil:
1. High indepent technology: This Sand grinding mills are main consists of chamber and disc dispersing system. The double end mechanical sealing with independent technology could resistant to more than 1600 kinds of solvents.
2. Better Cooling system:The cooling efficiency is better than normal mills because the sectional double spiral water course is more beneficial to heat exchange.
3. High Efficiency: The grinding efficiency is higher 15-30% than traditional mill machines; the combined disperser can rapidly increase dispersing efficiency.
4. Different materials chosed for inner chamber and dispersing discs: All the materials of contact parts could be chose from wearable steel, stainless steel, PU and ceramics for meeting different requirements.
5. Widely application used: This Super series are widely used in coating and paint, pigment, pesticide and agro-chemical industry, Pigment and dyestuffs, Printing inks, Gravure inks, food and food processing,non-metallic minerals.
The Technical Data of Sand Grinding Mil:
| No | main parameters | AP30 | Note |
| 1 | Non Explosion-proof motor kW | 30kW (Non Ex) | |
| 2 | Effective volume of grinding chamber (L) | 30 | |
| 3 | Water pressure (MPa) | 0.3 | |
| 4 | Cooling water consumption (L/min) | 2.5 -3m3/h | Advise offer the Cooling water less 10°C |
| 5 | Dimensions:L*W*H (mm) | 2000*900*2000 | |
| 6 | Weight (kg) | 1500 |
The Configuration instructions:
1. Outer chamber materials: 304 stainless steel
2. Inner Chamber materials: SIC
3 .Dispersing shaft: 40Cr with hard chromium plating
4. Dispersing disk: PU coated 304 stainless steel
5. Feeding and discharging end covers on the cylinder: 304 stainless steel
6. Turbine centrifugal separator and pins: 304 stainless steel and YG6 pins
7. Static discharge screen ring: Wire Wound screen ring with 304.Gaps: 0.5mm.
8. Mechanical seal: Intelligent double mechanical seal with indepent technology
9. Feeding pump: 1.” ARO diaphragm pump;
10. Appliance configuration: Non Explosion-proof machine, contacts., Control system :button type
11. Fasteners and connecting parts: Stainless steel clamp-type connecting parts.
| "Oubo AP series of Sand Grinding mill | ||||
| Type | Working Volume (L) | Power (kW) | Grinding Beads (mm) | Throughput (kg/h) |
| SP5 | 5 | 7.5 | 0.3-3.0 | 20-200 |
| SP15 | 15 | 15 | 0.3-3.0 | 50-500 |
| SP30 | 30 | 30 | 0.3-3.0 | 70-700 |
| SP50 | 50 | 37 | 0.3-3.0 | 100-1000 |
| SP100 | 100 | 55 | 0.3-3.0 | 300-3000 |
| SP250 | 250 | 75 | 0.3-3.0 | 450-4500 |
| SP300 | 300 | 90 | 0.3-3.0 | 550-5500 |
The packing and delivery :firstly anti-abrasion film and packed in wooden boxes, Then FCL and LCL Contianer for Seashipping